How to Flash Stock Firmware ROM (Flash File) Step 1: Download and extract the firmware on your computer. Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual. Step 3: Install the USB Drivers (skip if drivers are already installed). Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder. Step 5: Connect your Smartphone to the computer using the USB Driver. Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing. Step 7: Green Ring will appear at the end of successful Flash. Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile Brand : samsung ProdName : ja3gxx ProdModel : SM-N900 Device : ja3g AndroidVer: 4.2.2 MTKxCPU : MT6582 MTKxPRJ : ALPS.JB5.MP.V1.21 [Read Ok] : preloader_mbk82_wet_jb5.bin [Read Ok] : MBR [Read Ok] : EBR1 [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : secro.img [Read Ok] : logo.bin [Read Ok] : EBR2 [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [ScatCFG] : MT6582 / V1.1.1 / mbk82_wet_jb5 / EMMC Android Info saved HWConfig Info saved FW Size : 748 MiB Scatter saved to : C:\Users\babu\Desktop\read file\MT6582__samsung__SM-N900__ja3g__4.2.2__ALPS.JB5.MP.V1.21\ All done!
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034472843956B5AB00D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034472843956B5AB00D
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID : 0xE5974B4A8268A8ED4AC536C53B2D290D
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
Brand : samsung
ProdName : ja3gxx
ProdModel : SM-N900
Device : ja3g
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.JB5.MP.V1.21
[Read Ok] : preloader_mbk82_wet_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6582 / V1.1.1 / mbk82_wet_jb5 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 748 MiB
Scatter saved to : C:\Users\babu\Desktop\read file\MT6582__samsung__SM-N900__ja3g__4.2.2__ALPS.JB5.MP.V1.21\
All done!
Download Firware
Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile
